RPM R/C Products - +2 Suspension Mount for Redcat Lowriders - 72052
RPM R/C Products
$11.71
$16.95
(You save
$5.24
)
Write a Review
RPM R/C Products
RPM R/C Products - +2 Suspension Mount for Redcat Lowriders - 72052
The RPM +2 Front Suspension Mount for the Redcat Lowrider is built for one purpose: style! Nothing says "hoppin' hydro" like front wheels tipped out with positive camber, and now your RC can rock the same look.
On a full-size lowrider, "+2" means the upper A-arms are extended by 2 inches. Scaled down to 1/10, that's +0.2" (5.08mm). Longer arms push the tops of the wheels outward, creating the classic positive camber stance. Since there's no room to squeeze longer arms under these RC bodies, RPM engineered a smarter solution: reworked suspension geometry inside the mount itself.
The result? A dramatic 10deg camber shift! Stock camber sits around -2deg. With the RPM mount, you'll be riding at +8deg, all while keeping everything tucked neatly under the body.
Of course, changing camber affects toe angles too. To keep steering precise, they include a replacement steering center link that resets toe back to stock specs. In fact, prototype testers reported that despite the radical camber change, their cars actually handled better than stock.
Vehicle Compatibility: As of release, the RPM +2 Front Suspension Mount fits the following Redcat Lowrider models:
FIFTYNINE
SixtyThree
SixtyFour
SixtyFive
It also fits the Caprice Classic chassis; however, due to the narrower body, clearance is tight and rubbing may occur. For that reason, we do not recommend use on the Caprice Classic.
Tech Notes: The RPM +2 Front Suspension Mount is compatible with most Lowriders running the stock #RER13447 or #RER25839 front suspension mount.
On a full-size lowrider, "+2" means the upper A-arms are extended by 2 inches. Scaled down to 1/10, that's +0.2" (5.08mm). Longer arms push the tops of the wheels outward, creating the classic positive camber stance. Since there's no room to squeeze longer arms under these RC bodies, RPM engineered a smarter solution: reworked suspension geometry inside the mount itself.
The result? A dramatic 10deg camber shift! Stock camber sits around -2deg. With the RPM mount, you'll be riding at +8deg, all while keeping everything tucked neatly under the body.
Of course, changing camber affects toe angles too. To keep steering precise, they include a replacement steering center link that resets toe back to stock specs. In fact, prototype testers reported that despite the radical camber change, their cars actually handled better than stock.
Vehicle Compatibility: As of release, the RPM +2 Front Suspension Mount fits the following Redcat Lowrider models:
FIFTYNINE
SixtyThree
SixtyFour
SixtyFive
It also fits the Caprice Classic chassis; however, due to the narrower body, clearance is tight and rubbing may occur. For that reason, we do not recommend use on the Caprice Classic.
Tech Notes: The RPM +2 Front Suspension Mount is compatible with most Lowriders running the stock #RER13447 or #RER25839 front suspension mount.
Related Products
-
-
RPM R/C Products - HD v2 Wing Mounts, for the ARRMA Kraton EXB v2 - 81592
$21.12$23.95RPM RC Products
-
-
RPM R/C Products - Front Skid Plate for the Associated Rival MT8 - 72352
$9.68$10.95RPM RC Products
